Abrasion Resistant Cast Basalt Liner Plate for Coal Bunker Cement Plant
Home » Products » Slag Crusher » Tooth Plate » Abrasion Resistant Cast Basalt Liner Plate for Coal Bunker Cement Plant
Abrasion Resistant Cast Basalt Liner Plate for Coal Bunker Cement Plant
Abrasion Resistant Cast Basalt Liner Plate for Coal Bunker Cement Plant Abrasion Resistant Cast Basalt Liner Plate for Coal Bunker Cement Plant
AA AA
AA AA
AA AA
AA AA

loading

Abrasion Resistant Cast Basalt Liner Plate for Coal Bunker Cement Plant

5 0 Reviews
Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
Our cast stone liner plate is manufactured from natural basalt rock melted at 1200C and cast into precise tiles, delivering a material harder than most steel alloys and 5-10 times more abrasion-resistant. The tiles have a dense, vitreous dark blue-gray surface with a mirror-smooth glaze that allows bulk materials such as ore, coal, cement clinker, ash, gravel and chemical granules to slide freely without sticking, bridging or rat-holing. Installed with special high-strength cement mortar on chute walls, hopper bottoms, bunker interiors, silo cones, transfer chutes and screw conveyor troughs, they create a permanent wear surface that resists both sliding abrasion and moderate impact. Standard tile sizes range from 150x200mm to 300x600mm, with thickness from 20mm for light service to 50mm for high-impact ore chutes. Beveled edges form 45-degree chamfers that lock the mortar joints and prevent tile dislodgement. Curved tiles are available for silo cones, pipe bends and cyclone liners. Cast basalt has excellent chemical resistance to most acids, alkalis and salts, and will not rust or corrode like steel. We supply complete lining packages including tiles, special mortar, anchor bolts for high-impact zones, installation drawings and on-site technical guidance. As a direct manufacturer with ISO 9001 certification, we offer factory-direct pricing, custom tile shapes and fast lead times for emergency chute relining projects.
  • KCY

Availability:
Quantity:


Product Overview

banner_01_product_name


Product Overview
Cast stone liner plates are the economical choice for extending the life of bulk material handling equipment. Where steel liners wear out in 6-12 months under abrasive ore and coal flow, basalt tiles last 5-10 years, reducing shutdowns, replacement labor and spare parts inventory. The smooth glazed surface also solves material buildup problems in chutes and hoppers handling wet, sticky or cohesive materials such as clay, ash, pet coke and fertilizer granules. Unlike ultra-high-molecular-weight polyethylene (UHMWPE) or rubber liners that can delaminate, melt at elevated temperatures or soften under heavy load, cast basalt maintains its properties from -40C to +450C and handles direct material impact without backing damage. We supply tiles in flat rectangular form, curved arc segments for conical hoppers and pipe bends, and special shapes cut to your chute geometry. Installation uses a 10-20mm bed of high-strength cement mortar with beveled-edge tiles that interlock; anchor bolts with steel support plates are recommended for vertical walls and high-velocity impact zones. We provide free lining layout drawings based on your chute and hopper dimensions, including tile quantity, mortar volume and estimated installation labor. Our tiles come with mill test reports covering abrasion resistance (below 80 mg loss per ASTM G65), compressive strength above 200 MPa, water absorption below 0.5% and chemical composition. Export packing is on pallets with wooden crates suitable for ocean freight. We serve mining, cement, power generation, steel, chemical and port handling customers across Asia, Europe, the Middle East, Africa and the Americas.


Technical Specification


banner_02_technical_parameters


Product Name Cast Stone Liner Plate
Material Cast basalt (dark blue-gray)
Tile Size 150x200mm to 300x600mm (customizable)
Thickness 20mm / 25mm / 30mm / 40mm / 50mm
Edge Type Beveled 45-degree / square edge
Color Dark blue-gray (glazed surface)
Abrasion Resistance Below 80mg loss (ASTM G65); 5-10x steel
Compressive Strength Above 200 MPa
Water Absorption Below 0.5%
Operating Temperature -40C to +450C
Chemical Resistance Most acids, alkalis, salts
Installation Method High-strength cement mortar bedding
Surface Finish Vitreous glazed / mirror-smooth
Curved Tiles Available for silo cones, pipe bends
Anchor Bolts Optional for vertical walls and impact zones
Application Chutes, hoppers, bunkers, silos, screw conveyors
Lead Time Standard 15-25 days; emergency 7 days
Packing Palletized in wooden crates for export
Certification ISO 9001, mill test reports per batch
Service Life 5-10 years in abrasive bulk material service


Product Dscription


sec_03_three_stacked Cast basalt is 5-10 times more abrasion-resistant than steel, extending liner life to 5-10 years.Resists acids, alkalis and salts; will not rust or corrode like steel liners.
sec_08_two_leaning Mirror-smooth glazed surface prevents material buildup, bridging and rat-holing in chutes.Operates from -40C to +450C, suitable for hot clinker and ash handling chutes.
sec_10_3d_render Tiles installed with high-strength cement mortar, beveled edges lock joints securely.Standard sizes 150x200mm to 300x600mm, thickness 20-50mm for any abrasion level.
sec_02_45deg_angle Curved tiles available for silo cones, pipe bends and cyclone interior lining.Anchor bolts and steel-back rubber tiles recommended for high-impact receiving zones.
main_05_coal_bunker Payback typically within 12-18 months through reduced replacement labor and downtime.
main_06_clinker_chute Complete lining package: tiles, mortar, anchors, layout drawings and on-site guidance.


Customization


banner_04_customization_accepted


custom_01_photo_cad We manufacture cast stone liner plates fully custom to your chute, hopper or silo drawings. Standard rectangular tiles from 150x200mm to 300x600mm, thickness 20-50mm. Curved arc segments for conical hoppers and pipe bends. Special shapes cut to your geometry. Beveled or square edge options. Material: cast basalt (dark blue) standard; high-alumina ceramic tile option for extreme abrasion.
custom_02_dimension_overlay Upgrade options include: extra-thick 40-50mm tiles for high-impact ore chutes, steel-back tiles with rubber backing for shock absorption, anchor bolt holes pre-drilled for vertical walls, special high-strength cement mortar included, and wear-resistant chaser tiles at discharge points. We can also supply cast basalt pipes, elbows and tees for slurry and ash handling systems.
custom_03_install_crosssection OEM and ODM services with your brand name on pallets and crates. We supply complete lining kits: tiles, special mortar, anchor bolts, trowel and installation guide. Spare tile program available for 10 years. Technical consultation: send us your chute dimensions, material type, flow rate and we will recommend tile thickness, layout and mortar volume for your project.
custom_04_layout_staggered Complete turnkey supply includes: engineering review of your chute and hopper layout, lining design drawing with tile quantity list, FEA check for high-impact zones, manufacturing, quality inspection with mill test reports, pallet packing in wooden crates for export, and on-site installation supervision by our engineers if required. We handle urgent relining projects with 7-day emergency tile stock.


Advantage


banner_03_product_advantages



1 Cast basalt is 5-10 times more abrasion-resistant than steel, lasting 5-10 years in abrasive ore and coal chutes.
2 Mirror-smooth glazed surface lets materials slide freely, preventing buildup, bridging and rat-holing.
3 Beveled 45-degree edges interlock with cement mortar, preventing tile dislodgement under material impact.
4 Resistant to most acids, alkalis and salts; will not rust or corrode like steel liner plates.
5 Operates from -40C to +450C, suitable for hot clinker, ash and steam handling chutes.
6 Payback typically within 12-18 months through reduced replacement labor and equipment downtime.
7 Standard tile sizes from 150x200mm to 300x600mm for any chute wall or hopper bottom area.
8 Thickness from 20mm light service to 50mm high-impact ore chutes, matching your abrasion level.
9 Curved arc tiles available for silo cones, pipe bends and cyclone interior lining.
10 Installed with high-strength cement mortar that bonds tile to steel or concrete substrate.
11 Anchor bolts with steel support plates recommended for vertical walls and high-velocity impact zones.
12 Steel-back rubber tiles absorb shock at chute impact beds and hopper receiving points.
13 Unlike UHMWPE or rubber liners, basalt will not melt at high temperature or soften under heavy load.
14 Each batch comes with mill test reports: abrasion loss below 80mg, compressive strength over 200MPa.
15 We supply complete lining kits: tiles, special mortar, anchors, trowel and installation guide.
16 Free lining layout drawings based on your chute dimensions, with tile quantity and mortar volume.
17 Factory-direct pricing eliminates intermediary markup, making relining projects affordable.
18 Emergency 7-day tile stock available for urgent chute breakdown and production loss.
19 Smooth surface prevents sticky materials like wet clay, ash and pet coke from building up.
20 Basalt tiles do not require welding, can be installed by local masons with our guidance.
21 Cast basalt has low water absorption below 0.5%, resisting freeze-thaw cycles outdoors.
22 We supply cast basalt pipes, elbows and tees for complete slurry and ash handling systems.
23 Tiles are palletized and crated for ocean freight, minimizing shipping damage.
24 10-year spare tile program ensures matching tiles for future repairs and extensions.
25 We have served mining, cement, power, steel, chemical and port customers worldwide.
26 Tiles are dimensionally uniform, ensuring tight joints and a flat, smooth wear surface.
27 The vitreous surface is easy to clean with water or steam, no special maintenance required.
28 Beveled edges also provide a safer walking and working surface during installation.
29 We provide on-site installation supervision by our engineers for large or complex projects.
30 Backed by ISO 9001 quality system and 12-month warranty on manufacturing defects.


FAQ


banner_05_split_template



1 What is a cast stone liner plate? It is a wear-resistant tile made by melting natural basalt rock at 1200C and casting it into rectangular plates, used to line chutes, hoppers and silos against abrasion.
2 Where is it used? In mining ore chutes, coal bunker, cement clinker chutes, power plant ash handling, steel plant sinter chutes, chemical granular material chutes and port grain handling.
3 How does it compare to steel liner? Cast basalt is 5-10 times more abrasion-resistant than steel. Steel wears out in 6-12 months under abrasive ore; basalt lasts 5-10 years.
4 How is it installed? Tiles are laid on a 10-20mm bed of high-strength cement mortar on the steel chute wall or concrete substrate. Beveled edges face up, mortar fills the joints. Anchor bolts can be added for vertical walls.
5 What sizes are available? Standard tiles are 150x200mm, 200x300mm, 300x500mm and 300x600mm, thickness 20/25/30/40/50mm. Custom sizes and curved tiles available.
6 What thickness should I choose? Use 20-25mm for light sliding abrasion like grain and fine sand. Use 30mm for general coal and cement. Use 40-50mm for high-impact ore chutes and receiving hoppers.
7 Can it handle hot materials? Yes, cast basalt operates continuously up to 450C, suitable for hot clinker, ash and steam chutes. It will not soften or melt like UHMWPE or rubber liners.
8 Is it chemical resistant? Yes, it resists most acids, alkalis and salts. It will not rust or corrode. It is suitable for chemical granules, fertilizers and seawater environments.
9 How long does it last? Typically 5-10 years in abrasive ore and coal service. Life depends on material abrasiveness, particle size, impact velocity and chute slope.
10 Can you make curved tiles? Yes, we make curved arc segments for silo cones, hopper bottoms and pipe bends. Send us your radius and angle, we will cast the matching arc tiles.
11 How do I prevent material buildup? The smooth glazed basalt surface lets materials slide freely. For very sticky materials, use the smoothest glazed surface and ensure chute slope is above 55 degrees.
12 What is the lead time? Standard tiles ship in 15-25 days. Emergency stock for standard sizes ships in 7 days for urgent chute breakdown. Custom curved tiles take 30-45 days.
13 Do you supply the mortar? Yes, we supply special high-strength cement mortar designed for basalt tile installation. It is included in our complete lining kit. Standard local mortar can also work but we recommend our mortar.
14 Can existing steel liners be covered? Yes, basalt tiles can be installed directly over worn steel liners using cement mortar, provided the steel is sound and flat. This saves removing the old liner.
15 How much does it cost? Cost depends on tile size, thickness and quantity. As a factory, we offer direct pricing. Send us your chute dimensions and we will quote within 24 hours including tiles and mortar.
16 What is abrasion resistance? Our tiles lose less than 80mg in ASTM G65 abrasion test, which is 5-10 times better than ordinary steel. This means 5-10 times longer service life.
17 Do you provide installation guidance? Yes, we provide installation drawings, video guidance and can send technicians to supervise on-site installation for large projects. Local masons can handle the work with our guidance.
18 How are tiles packed for export? Tiles are stacked on wooden pallets, strapped and wrapped, then loaded into wooden crates. Pallet dimensions and weight are optimized for container loading.
19 What is compressive strength? Our basalt tiles have compressive strength above 200 MPa, meaning they resist high material pressure in deep silos without cracking.
20 Can it be cut on site? Basalt is very hard and cannot be cut with ordinary tools. We recommend ordering special shapes and corner tiles from our factory. If on-site trimming is needed, use diamond saw.
21 What is the advantage over ceramic tiles? Both are wear resistant. Basalt is more economical and tougher under impact; alumina ceramic is harder but more brittle. For high-impact ore chutes, basalt is preferred.
22 Does it resist freeze-thaw? Yes, water absorption is below 0.5%, so tiles resist freeze-thaw cycles in outdoor and cold-climate chutes without cracking.
23 Do you supply anchor bolts? Yes, we supply stainless or galvanized anchor bolts with steel support plates for vertical walls and high-velocity impact zones where mortar alone may not hold.
24 How do I calculate quantity? Send us your chute wall and hopper bottom dimensions. We will calculate tile count, mortar volume and give you a Bill of Materials drawing free of charge.
25 What is the warranty? We provide a 12-month warranty from shipment date for manufacturing defects. We also provide technical guidance to ensure proper installation.
26 Can you supply cast basalt pipes? Yes, we supply cast basalt pipes, elbows, tees and reducers for slurry, ash and pneumatic conveying systems, lined with the same wear-resistant basalt.
27 What industries do you serve? Mining, cement, power generation, steel, chemical, port handling, fertilizer, coal preparation and food bulk handling industries worldwide.
28 How do I clean the surface? The glazed surface is self-cleaning; water or steam washes away any residue. No scraping or brushing needed. This is a key advantage over rough steel liners.
29 What is the color? Standard color is dark blue-gray with a glazed vitreous surface. This is the natural color of cast basalt. No painting or coating needed.
30 How do I order? Send us your chute/hopper dimensions, material handled, required tile size or thickness preference, and quantity needed. We reply within 24 hours with a quotation and drawing.


4


10


5

6

7

Qingdao Kechengyi Environmental Protection and Electric Power Technologies Co. LTD (KCY) is a comprehensive enterprise focusing on equipment research & development...

Quick Links

Product Category

Contact Us
Tel: +86-15895221943
Add: Sanlihe Industrial Park, Jiaozhou City, Qingdao, Shandong Province
Copyright © 2024 KCY All Rights Reserved. | Sitemap | Privacy Policy