KCY
| Availability: | |
|---|---|
| Quantity: | |

| Product Overview |
For coal crusher and clinker crusher duty we adjust the gap and liner grade, because a limestone crusher and a construction waste crusher see very different impact. The hammer crusher output size adjustment is set on site, a mini hammer crusher shares the same wear parts, and our crusher overhaul service keeps the crusher rotor balanced after hammer changes. |

| 1 | Model type | Box type hammer crusher |
| 2 | Capacity | 5-200 t/h |
| 3 | Max feed size | ≤ 400 mm |
| 4 | Output size | 0-40 mm adjustable |
| 5 | Rotor diameter | 400-1200 mm |
| 6 | Rotor length | 400-1500 mm |
| 7 | Hammer quantity | 12-48 pcs |
| 8 | Hammer material | Manganese steel / alloy steel |
| 9 | Liner material | Mn13 / wear resistant plate |
| 10 | Motor power | 11-250 kW |
| 11 | Voltage and frequency | 380 V 50 Hz or as required |
| 12 | Drive type | V belt drive with guard |
| 13 | Housing plate thickness | 10-20 mm |
| 14 | Discharge gap | 10-60 mm shim set |
| 15 | Weight | 1.2-18 t |
| 16 | Overall size | Per drawing |
| 17 | Noise level | ≤ 90 dB(A) at 1 m |
| 18 | Dust control | Enclosure with extraction point |
| 19 | Foundation | Concrete with anchor bolts |
| 20 | Surface finish | Primer + top coat, RAL colour |
| 21 | Packing | Bare or seaworthy crates |
| 22 | Warranty | 12 months on main frame |

The box type crusher housing is welded from thick plate with stiffening ribs, so the frame does not twist when a hard lump passes through. Weld seams are inspected before painting. Bolts are torqued to the drawing value.

Hammers are supplied in matched sets by weight, so the hammer crusher rotor stays balanced after replacement. The rotor is balanced at the works. Each unit runs a no load test. Drawings are issued before cutting.



| 1 | The box type crusher frame is thick plate welded with stiffeners, so the industrial crusher holds alignment under impact. Each unit runs a no load test. Drawings are issued before cutting. |
| 2 | Hammers ship in matched weight sets, keeping the hammer crusher rotor balanced after every change. Drawings are issued before cutting. Hammers are weighed in matched sets. The belt guard is interlocked on request. |
| 3 | Side liners bolt on from outside, so wear liner plate replacement needs no chamber entry. Hammers are weighed in matched sets. The belt guard is interlocked on request. Foundation bolts ship with the frame. |
| 4 | As a crusher manufacturer we cut, roll, weld and machine in one workshop, so tolerances stay stable. The belt guard is interlocked on request. Foundation bolts ship with the frame. Spare hammers are quoted with the unit. |
| 5 | The discharge gap is shim set with a gauge, making crusher output size adjustment repeatable. Foundation bolts ship with the frame. Spare hammers are quoted with the unit. Batch records are kept for two years. |
| 6 | A crusher with belt drive slips instead of shearing when a hard lump jams the rotor. Spare hammers are quoted with the unit. Batch records are kept for two years. Weld seams are inspected before painting. |
| 7 | The electric motor crusher uses a slotted base so belt tension is reset in minutes. Batch records are kept for two years. Weld seams are inspected before painting. The rotor is balanced at the works. |
| 8 | Heavy hammer crusher rotors are balanced on a dynamic stand before assembly. Weld seams are inspected before painting. The rotor is balanced at the works. Bolts are torqued to the drawing value. |
| 9 | Limestone crusher models carry an adjustable breaker plate to hold the product curve. The rotor is balanced at the works. Bolts are torqued to the drawing value. Each unit runs a no load test. |
| 10 | Clinker crusher internals use manganese liners rated for hot abrasive lumps. Bolts are torqued to the drawing value. Each unit runs a no load test. Drawings are issued before cutting. |
| 11 | Coal crusher units ship with a dust enclosure, keeping fines inside the crushing equipment. Each unit runs a no load test. Drawings are issued before cutting. Hammers are weighed in matched sets. |
| 12 | Construction waste crusher builds use a reinforced feed lip for rebar laden rubble. Drawings are issued before cutting. Hammers are weighed in matched sets. The belt guard is interlocked on request. |
| 13 | A brick crusher version tolerates hollow block and mortar, which ordinary crushers choke on. Hammers are weighed in matched sets. The belt guard is interlocked on request. Foundation bolts ship with the frame. |
| 14 | Glass crusher models use a tight gap and smooth chamber for cullet sizing. The belt guard is interlocked on request. Foundation bolts ship with the frame. Spare hammers are quoted with the unit. |
| 15 | Concrete crusher frames are stiffened for repeated heavy impact from demolition块. Foundation bolts ship with the frame. Spare hammers are quoted with the unit. Batch records are kept for two years. |
| 16 | Ore crusher units can be fitted with a wear plate rotor for abrasive rock. Spare hammers are quoted with the unit. Batch records are kept for two years. Weld seams are inspected before painting. |
| 17 | Mini hammer crusher units are skid mounted and wired, so a small site starts fast. Batch records are kept for two years. Weld seams are inspected before painting. The rotor is balanced at the works. |
| 18 | Stone crusher machine orders include foundation bolts and a layout drawing. Weld seams are inspected before painting. The rotor is balanced at the works. Bolts are torqued to the drawing value. |
| 19 | Crusher spare parts are stocked: hammers, liners, rotor shafts and bearings. The rotor is balanced at the works. Bolts are torqued to the drawing value. Each unit runs a no load test. |
| 20 | Crusher installation drawings and torque values ship with each crushing equipment order. Bolts are torqued to the drawing value. Each unit runs a no load test. Drawings are issued before cutting. |
| 21 | Our crusher overhaul service rebalances the crusher rotor after a hammer change. Each unit runs a no load test. Drawings are issued before cutting. Hammers are weighed in matched sets. |
| 22 | Every crusher price sheet lists capacity, feed size, motor power and weight, so quotes compare. Drawings are issued before cutting. Hammers are weighed in matched sets. The belt guard is interlocked on request. |
| 23 | We quote as a crusher supplier on FOB and CIF terms with a container loading plan. Hammers are weighed in matched sets. The belt guard is interlocked on request. Foundation bolts ship with the frame. |
| 24 | A custom crusher is drawn from your site data, not assembled from a catalogue. The belt guard is interlocked on request. Foundation bolts ship with the frame. Spare hammers are quoted with the unit. |
| 25 | Industrial crushing machine orders include a commissioning checklist for the local inspector. Foundation bolts ship with the frame. Spare hammers are quoted with the unit. Batch records are kept for two years. |
| 26 | Hammer crusher for sale units can be inspected under power before shipment on request. Spare hammers are quoted with the unit. Batch records are kept for two years. Weld seams are inspected before painting. |
| 27 | Replacement of an old unit: we match the foundation and duct sizes so the new crusher drops in. Batch records are kept for two years. Weld seams are inspected before painting. The rotor is balanced at the works. |
| 28 | Paint is two coat over primer and checked for dry film before packing. Weld seams are inspected before painting. The rotor is balanced at the works. Bolts are torqued to the drawing value. |
| 29 | Belt guards are bolted and removable, giving access without tools beyond a spanner. The rotor is balanced at the works. Bolts are torqued to the drawing value. Each unit runs a no load test. |
| 30 | Batch photos and test records are sent before the vessel sails. Bolts are torqued to the drawing value. Each unit runs a no load test. Drawings are issued before cutting. Hammers are weighed in matched sets. |





FAQ
| 1 | What material can this crusher handle? | Limestone, clinker, coal, gypsum, shale, glass, brick and demolition rubble; hardness above about 300 MPa needs another crusher type. |
| 2 | How do I choose between hammer crusher and box type crusher? | They share the same working principle; the box type crusher is the heavier welded frame version for continuous duty and larger feed. |
| 3 | What is the maximum feed size? | Normally up to four hundred millimetres depending on model; larger lumps need a primary crusher ahead. |
| 4 | How is the output size adjusted? | By shims at the discharge gap and by breaker plate position; crusher output size adjustment is done with the machine stopped. |
| 5 | How long do hammers last? | Manganese hammers typically run three to twelve months depending on silica content; alloy hammers last longer in abrasive rock. |
| 6 | Can you supply spare hammers and liners? | Yes. Crusher spare parts including crusher hammer sets, wear liner plate and rotor shafts are stocked for fast shipment. |
| 7 | Why belt drive instead of direct coupling? | A crusher with belt drive protects the rotor from shock loads and allows speed tuning by pulley ratio. |
| 8 | What motor do you supply? | An electric motor crusher at three hundred eighty volt fifty hertz by default, other voltages on request with local grid data. |
| 9 | Do you provide foundation drawings? | Yes, foundation layout, anchor bolt positions and dynamic load notes ship with each crushing equipment order. |
| 10 | How long is the lead time? | About twenty five days for standard models and thirty five days for a custom crusher after drawing approval. |
| 11 | Can you match the footprint of my old crusher? | Yes, send the old foundation drawing or measurements and we build the new unit to drop in without civil works. |
| 12 | Is there a dust problem? | We supply a dust enclosure with an extraction point, which can be connected to a bag filter for indoor installations. |
| 13 | What about noise? | Around ninety decibels at one metre; an acoustic enclosure or rubber lined chute can be quoted for urban sites. |
| 14 | Can it crush wet material? | Damp coal and clay tend to stick; we add a scraper plate and a wider gap for wet feed. |
| 15 | How many units fit in a container? | A small unit fits in one twenty foot container; larger frames ship break bulk or in a forty foot flat rack. |
| 16 | Do you offer installation service? | We supply drawings, torque values and a commissioning checklist; supervisor attendance can be arranged. |
| 17 | What is the warranty? | Twelve months on the main frame and rotor, with wear parts excluded and replaced at cost. |
| 18 | Can the rotor be rebalanced on site? | A crusher overhaul service can rebalance in our works; on site we supply a balancing procedure and matched hammer sets. |
| 19 | Is a variable speed drive possible? | Yes, a VFD can be quoted for capacity turndown, but it must be sized for the starting torque. |
| 20 | What lubrication is required? | Grease lubrication at the bearing housings on a weekly schedule, with two grease points per side. |
| 21 | Can you supply a mobile version? | A skid or trailer mounted version is possible for construction waste crusher projects. |
| 22 | How do you test before shipment? | No load run, rotor balance check, gap setting and paint thickness, with photos before loading. |
| 23 | What payment terms do you accept? | Thirty percent deposit with balance against bill of lading copy for new buyers; terms open for repeat orders. |
| 24 | Do you have export certification? | We provide mill certificates, test records and packing lists; market specific certification must be confirmed before ordering. |
| 25 | What if the machine jams? | Stop feed, reverse the rotor by hand through the inspection door, and clear the chamber; the belt drive protects the shaft meanwhile. |
| 26 | Can the gap be changed for a different product? | Yes, shim sets allow several settings, and we supply a gap chart for common products. |
| 27 | Is the machine suitable for food grade material? | For salt and food powder we use stainless contact parts and a polished chamber; this must be specified at enquiry. |
| 28 | How do you handle a quality claim? | Send photos with the serial number; we replace or credit after review and record the cause in the next batch. |
| 29 | Can I visit the workshop? | Yes, factory visits and video walkthroughs of the welding and machining lines can be arranged. |
| 30 | Can the crusher be installed outdoors? | Yes, with a rain cover over the motor and a galvanized frame option; the belt guard is sealed against water ingress. |