KCY
| Availability: | |
|---|---|
| Quantity: | |

| Product Overview |
| The inner guide wheel is engineered to support the return strand of the scraper chain from below, preventing chain sag, chain whip and side misalignment in horizontal and inclined conveyor runs. The sealed spherical roller bearing accommodates misalignment and shock loads from the moving chain, while the grease zerk fitting allows easy periodic relubrication without removing the assembly from the trough. The welded steel housing is designed for long service life: triangular gussets transfer side loads from the chain across the full flange diameter, the bolted top cap allows bearing replacement without cutting the housing, and the bottom ring flange centers the wheel and prevents lateral walk. Two side mounting lugs with through-holes bolt to the conveyor trough sidewall or bottom crossmember, providing a rigid installation. Blue baked-on paint resists plant dust and moisture, and can be touched up during scheduled maintenance. For outdoor or corrosive service, hot-dip galvanizing and epoxy coating are available. We supply complete guide wheel assemblies including pre-greased bearings, mounting bolts and installation drawings, and can also supply replacement bearing cartridges and seals as spare parts. As a direct welded fabrication factory, we offer competitive pricing, short lead times for emergency spares, and engineering support for conveyor wear surveys and upgrades. Our guide wheels are trusted by ash handling and bulk material operators across Asia, Europe, the Middle East and Africa. |
Technical Specification

| Product Name | Strong Reliable Inner Guide Wheel |
| Application | Bottom support and chain guidance in scraper/en masse/drag conveyors |
| Construction | Welded steel housing with cylindrical bearing bore on flange base |
| Housing Material | Q235B carbon steel; Q355B high-strength; stainless 304/316 optional |
| Bearing Type | Sealed spherical roller bearing (pre-greased); deep groove ball optional |
| Outside Diameter | 200mm to 800mm (customizable to drawing) |
| Bore / Shaft Size | Matched to bearing: typically 30mm to 160mm |
| Flange Base | Circular bolted flange with bottom centering ring |
| Mounting Lugs | Two side lugs with through-bolt holes (pattern customizable) |
| Reinforcement | Triangular gusset plates between hub and flange |
| Lubrication | Grease zerk fitting; factory pre-greased bearing |
| Top Cap | Bolted removable cap for bearing access |
| Sealing | Labyrinth or rubber lip seal; dust and ash protection |
| Surface Finish | Blue baked-on paint standard; galvanizing/epoxy optional |
| Rated Load | Depending on size: 5kN to 50kN dynamic load rating |
| Operating Temperature | -20C to +120C standard; up to +250C with heat-resistant steel |
| Welding Standard | Full penetration welds; stress relieved after welding |
| Testing | Load test at 1.5x rated; dimensional inspection |
| Lead Time | Standard 5-15 days; custom 2-4 weeks |
| Certification | ISO 9001, material mill test reports, welding certificates |
Product Dscription
Sealed spherical roller bearing accommodates chain misalignment and shock loads for smooth rotation.
Triangular gusset plates reinforce the hub-to-flange joint, resisting side loads from the moving scraper chain.
Bolted top cap allows bearing inspection and replacement without cutting or welding the housing.Welded steel construction with full penetration joints and stress relief treatment for fatigue resistance.
Standard grease zerk fitting enables periodic relubrication without removing the wheel from the trough.Blue baked-on paint provides indoor corrosion protection; galvanizing and epoxy available for outdoor use.
Side mounting lugs with through-bolts fasten rigidly to the conveyor trough bottom or sidewall.
Bottom ring flange centers the guide wheel and prevents lateral walk under fluctuating chain loads. Customization

We manufacture inner guide wheels fully custom to your conveyor drawings. Outside diameter, hub height, bore size, bearing type (deep groove ball, spherical roller, taper roller), mounting lug pattern and bottom flange diameter are all matched to your trough. Material: Q235B carbon steel, Q355B high-strength, stainless 304/316 or heat-resistant steel for high-temp slag service.
Upgrade options include: heavy-duty spherical roller bearing for higher loads, labyrinth seals for dusty environments, felt or rubber lip seals, temperature rating up to 250C, quick-release top cap, dual mounting lug arrangements, and wear-resistant bushing inserts. Surface finish: blue paint, red oxide, hot-dip galvanizing or epoxy coating.
OEM and ODM services with your brand name and color. We supply complete guide wheel assemblies including housing, pre-greased bearing, mounting bolts, seals and installation drawings. Spare parts program: replacement bearing cartridges, seal kits, gaskets and grease nipples available for 10 years.
Complete turnkey supply includes: engineering review of your conveyor drawings, load calculation and FEA verification of the gusseted housing, fabrication, welding, stress relief, machining, bearing press-fit, load testing, painting, export packing and on-site installation guidance by our engineers if required. Advantage

| 1 | Sealed spherical roller bearing self-aligns to accommodate chain misalignment, preventing binding and premature bearing failure. |
| 2 | Triangular gusset plates transfer chain side loads across the full flange diameter, eliminating stress concentration at the hub. |
| 3 | Bolted top cap allows bearing replacement in minutes without cutting or rewelding the housing, reducing maintenance downtime. |
| 4 | Standard grease zerk fitting enables periodic relubrication while the wheel remains installed, extending bearing life to design rating. |
| 5 | Side mounting lugs bolt directly to the trough bottom, providing a rigid installation that resists lifting under chain tension. |
| 6 | Bottom ring flange centers the wheel and prevents lateral walk, keeping the chain aligned with the conveyor centerline. |
| 7 | Full penetration welds at all critical joints, stress-relieved after welding, ensure long fatigue life under continuous conveyor duty. |
| 8 | Pre-greased and factory-sealed, the guide wheel arrives ready to install with mounting bolts, no on-site bearing packing needed. |
| 9 | Each unit load tested at 1.5 times rated load before shipment, guaranteeing structural integrity under actual chain loads. |
| 10 | Blue baked-on paint resists plant dust, moisture and mild chemicals, maintaining corrosion protection through years of service. |
| 11 | Welded steel construction costs less than fully cast guide wheels while matching load capacity, saving procurement budget. |
| 12 | We match your existing trough width, chain size and bolt pattern exactly, ensuring drop-in replacement without modification. |
| 13 | Labyrinth seal option blocks dust and ash from entering the bearing, critical for power plant and cement plant environments. |
| 14 | The guide wheel supports the return chain from below, preventing sag that causes chain whip, noise and accelerated wear. |
| 15 | Custom bearing selection: deep groove ball for light loads, spherical roller for heavy shock, taper roller for axial loads. |
| 16 | Stainless steel 304/316 construction available for corrosive chemical, food or wastewater conveyor applications. |
| 17 | The rotating guide wheel reduces friction between chain and trough floor compared to fixed slide rails, saving drive power. |
| 18 | Heat-resistant steel construction available for conveyor applications handling hot slag up to 250C ambient temperature. |
| 19 | Spare bearing cartridges and seal kits are stocked for quick replacement during scheduled maintenance shutdowns. |
| 20 | We provide installation drawings, load calculation reports and 3D CAD models for your conveyor layout planning. |
| 21 | Two side mounting lugs provide redundant fastening, so even if one bolt loosens the wheel remains captive in the trough. |
| 22 | The housing is designed for re-greasing without disassembly: simply connect a grease gun to the zerk fitting. |
| 23 | Hot-dip galvanizing option extends outdoor service life to 10+ years for exposed conveyor installations. |
| 24 | Welded construction allows quick modification of lug position or flange diameter compared to fixed cast designs. |
| 25 | The guide wheel housing is marked with serial number, rated load and manufacturing date for quality traceability. |
| 26 | Smooth rotating action reduces chain noise by up to 50 percent compared to plastic or fixed slider guides. |
| 27 | Factory-direct pricing eliminates intermediary markup, making replacement guide wheels affordable even for large conveyors. |
| 28 | Standard stocked guide wheels ship within 5 days for urgent conveyor downtime emergencies. |
| 29 | Response to custom inquiries within 24 hours, with engineering drawings returned within 3 working days. |
| 30 | Backed by a 12-month warranty and global spare parts availability, our inner guide wheels are trusted by conveyor operators. |
FAQ

| 1 | What is an inner guide wheel? | It is a welded steel bearing assembly installed at the bottom of a scraper conveyor trough to support and guide the return chain. |
| 2 | How does it differ from a tail sprocket? | A tail sprocket engages the chain teeth at the conveyor end. An inner guide wheel supports the chain from below along the trough without tooth engagement. |
| 3 | What bearing is inside? | Standard is a pre-greased sealed spherical roller bearing. Options include deep groove ball bearings for light loads and taper roller bearings for axial loads. |
| 4 | How is it mounted? | The two side mounting lugs bolt to the conveyor trough bottom or sidewall crossmember. The bottom flange ring centers the wheel laterally. |
| 5 | Can you make custom sizes? | Yes, we manufacture from 200mm to 800mm OD based on your conveyor drawing. Any bore, bearing type, lug pattern and flange diameter is available. |
| 6 | How long does the bearing last? | Under normal ash handling conditions with proper relubrication, 3-5 years. Sealed bearings are maintenance-free for the first 2 years. |
| 7 | What is the blue paint? | Standard is shot-blasted blue industrial enamel baked on. Optional red oxide, hot-dip galvanizing for outdoor use, or epoxy coating for chemical environments. |
| 8 | How do I relubricate? | Connect a standard grease gun to the zerk fitting on the bearing housing. Add grease while the wheel is stationary, until fresh grease emerges from the seal. |
| 9 | Can I replace the bearing myself? | Yes, remove the top cap bolts, lift off the cap, press out the old bearing cartridge and press in the new one. No welding or cutting required. |
| 10 | What is the gusset for? | Triangular gusset plates reinforce the junction between the cylindrical hub and the flange base, transferring side loads from the chain and preventing weld fatigue cracks. |
| 11 | What industries use these? | Thermal power plants (ash handling), cement plants, mining, steel mills, chemical plants, grain terminals and bulk material handling facilities. |
| 12 | How do I order? | Send us your conveyor model or drawing, chain size, required OD, trough width and mounting bolt pattern. We recommend the correct bearing and quote within 24 hours. |
| 13 | Do you supply complete assemblies? | Yes, the guide wheel ships as a complete unit with pre-greased bearing, top cap, mounting bolts and installation drawing. No on-site assembly needed. |
| 14 | What is the bottom ring flange? | The bottom ring is a larger diameter flange below the housing that centers the wheel in the trough and prevents lateral walk under chain tension. |
| 15 | Can it handle high temperature? | Standard bearings work up to 120C. For hot slag applications up to 250C, we provide heat-resistant steel housing and high-temperature grease. |
| 16 | What is the load capacity? | Load capacity depends on size and bearing selection: small units 5kN dynamic rating, large units up to 50kN. We calculate based on your chain weight and speed. |
| 17 | Do you provide material certificates? | Yes, each batch includes mill test reports for the steel, welding inspection records, bearing manufacturer certificates and load test reports. |
| 18 | How do I know when to replace it? | Replace when the wheel spins roughly or squeaks, the bearing has play, or the housing shows cracks. Inspect during scheduled maintenance shutdowns. |
| 19 | Can you make stainless steel? | Yes, for corrosive chemicals, food or wastewater conveyors we offer 304 or 316 stainless steel housings with food-grade bearings. |
| 20 | What is the lead time? | Standard stocked guide wheels ship in 5-15 days. Custom units to drawing take 2-4 weeks depending on size and bearing availability. |
| 21 | How is it different from a slider? | A fixed slider wears and causes friction. A rotating guide wheel rolls with the chain, reducing friction, noise and wear, saving drive energy. |
| 22 | What seals are available? | Standard is rubber lip seal. For dusty ash environments we recommend labyrinth seals. For wet applications, double lip seals with grease barrier. |
| 23 | Can the lug position be changed? | Yes, since it is welded construction, we can position the mounting lugs at any angle and on either side to match your trough crossmember layout. |
| 24 | What is the warranty? | We provide a 12-month warranty from shipment date for manufacturing defects. Bearings and seals are wear items covered under normal relubrication schedule. |
| 25 | Do you export worldwide? | Yes, we export to over 30 countries with export wooden crate packing and FOB, CIF shipping terms available. |
| 26 | Can you provide 3D CAD? | Yes, after order confirmation we provide STEP files and general arrangement drawings for your conveyor layout and installation planning. |
| 27 | How tight should mounting bolts be? | Torque the mounting lug bolts to the recommended grade 8.8 torque for the bolt size, and re-torque after the first week of operation to account for seating. |
| 28 | What causes bearing failure? | Most failures come from lack of relubrication allowing ash ingress, or overloading beyond rated capacity. We provide a recommended greasing interval for your duty. |
| 29 | Do you supply spare bearings? | Yes, we stock matching replacement bearing cartridges, seal kits, top cap gaskets and grease nipples as spare parts for long-term maintenance. |
| 30 | What information is needed for a quote? | Please provide: conveyor model or drawing, chain size and weight, trough width, required OD, mounting bolt pattern, ambient temperature and quantity. We reply within 24 hours. |




