KCY
| Availability: | |
|---|---|
| Quantity: | |

| Product Overview |
| Our KCY Rotary Joint works as Roller Rotary Joint and Dryer Rotary Joint, widely matched rollers, rotary kilns, dryers, mixers and extruders. Side ports pass medium, internal channel leads fluid into rotating drum and out. Rotary Oil Union delivers hydraulic and lubricating oil; Water Rotary Union carries cooling and softened water. Dual Passage Rotary Joint arranges two independent circuits without cross leakage. Stainless body optional for corrosive or hygienic service; Wear Resistant Rotary Joint seals selected by medium abrasion. Rotary Seal Joint seal wear judged by external leakage, replace seal ring early to restore performance without scrapping whole joint. Equipment Rotary Union mounted at equipment shaft end, stationary flange connects line, rotating side turns with shaft. Rotary Connector isolates fixed line twist, protecting hose and joint. Pipe Rotary Connector custom flange or thread by mating interface. Mixer Rotary Joint, paper machine and extruder unions all matched. KCY also supplies bearing, seal ring, gasket and bolt spares, trusted supplier for Stainless Steel Rotary Joint and Custom Rotary Joint, supporting OEM, export packing and installation commissioning. |
Technical Specification

| Product Name | Rotary Joint |
| Product Type | rotary water joint, rotary union |
| Nominal Diameter | DN15 – DN200(customizable) |
| Nominal Pressure | PN6 – PN25 |
| Medium | water, hydraulic oil, lube oil, steam, air |
| Working Temp | -10°C – 250°C(by seal material) |
| Rotation Speed | ≤300 r/min(by model) |
| Body Material | CS / SS304/316L / copper alloy |
| Seal Material | NBR / FKM / PTFE |
| Bearing | ball / needle bearing |
| Passage | single / dual passage |
| Connection | flanged / thread / weld / ferrule |
| Flange Standard | GB / ANSI 150# / DIN |
| Sealing | mechanical / packing seal |
| Rotation | single / double direction |
| Port Orientation | side / end / per drawing |
| Finish | blasted / galvanized / passivated / polished |
| Application | paper, chemical, metallurgy, plastic, food, machinery |
| Customization | OEM / bore, pressure, temp, passage, connection, material OEM |
| Brand | KCY |
Product Dscription
Body machined from carbon or stainless bar/tube, shot blasted or galvanized passivated, robust metal structure bearing line pressure and equipment load.
Two precision bearings support spindle rotation, smooth and persistent, low friction, long operation at higher speed, low vibration and noise.
Seal ring and face special wear/corrosion resistant material, fits spindle and body, blocks medium leakage, maintains seal over long service.
Side inlet/outlet flange machined to standard, holes match line flange, gasket and bolt fasten; thread or weld connection optional by equipment interface.
Single or dual passage; single carries one medium, dual two independent fluids without cross leakage, internal channel configured by equipment.
Stationary side connects fixed pipe without turning; rotating side turns with component; bearing and seal ring relative motion transfer fluid. Customization

Custom bore DN15–DN200 by flow and pipe interface; body carbon, 304, 316L or copper alloy optional. Connection flange, thread, weld or ferrule, flange GB/ANSI/DIN. Single or dual passage, channel direction and port orientation designed by equipment layout.
Seals selected by medium: oil resistant rubber, NBR, FKM, graphite or PTFE; bearing ball or needle type by speed and load. High-temp steam uses heat seal and grease; corrosive medium stainless body and seal. Rotation direction, speed and pressure grade customizable.
Can match equipment shaft flange, adapter, hose and support bracket; custom shell color, nameplate and marking. Stainless version passivated or polished for food/pharmaceutical hygiene. Special outer dimensions designed by customer equipment space.
OEM supported, nameplate, packaging and manual with customer brand. 2D/3D CAD outline, installation and seal structure drawing provided. Export anti-rust moisture-proof packing, on-site installation guidance, seal commissioning and after-sales support. Advantage

| 1 | Rotary Joint enables continuous fluid transfer between stationary pipe and rotating part, solving stationary line inability to turn with equipment. |
| 2 | Rotary Water Joint seal ring tight, water and coolant no external leakage, keeping equipment and workshop clean and dry. |
| 3 | Rotary Union bearings support spindle, smooth rotation without jamming, line does not twist or fatigue during equipment turning. |
| 4 | Hydraulic Rotary Joint bears circuit pressure, internal seal pressure resistant, hydraulic oil stably delivered to rotating actuator. |
| 5 | Steam Rotary Joint body and seal heat resistant, suits high-temp steam and hot flue gas, no softening or leakage. |
| 6 | Cooling Water Rotary Joint continuously removes equipment heat, maintains normal working temp of rollers and bearings, extending life. |
| 7 | Rotary Connector stationary-rotating separation, stationary side fixed, rotating side turns, relative motion sealed reliably. |
| 8 | Metal Rotary Joint high body strength, bears line reaction and equipment vibration, no deformation or cracking over service. |
| 9 | Rotary Joint Manufacturer direct main unit and spares, bearings, seal rings, gaskets complete, one-stop low coordination cost. |
| 10 | Rotary Swivel Joint low friction coefficient, adapts higher speed, low temperature rise over long operation, long bearing life. |
| 11 | Flanged Rotary Joint matches standard flange line, bolt and gasket install easy, maintenance disassembly no on-site welding. |
| 12 | Stainless Steel Rotary Joint corrosion resistant, for seawater, weak acid and chemical, clean neat surface, hygienic service. |
| 13 | High Pressure Rotary Joint reinforced wall and seal, withstands hydraulic and water supply pressure fluctuation, seal holds. |
| 14 | High Speed Rotary Joint balance designed, small rotation vibration, reducing additional load on equipment shaft and piping. |
| 15 | Water Rotary Union smooth channel, ample cooling flow, low resistance, ensuring heat exchange and cooling effect. |
| 16 | Oil Rotary Joint oil resistant seal, hydraulic and lubricating oil no leakage, lubrication and oil supply circuit stable reliable. |
| 17 | Rotary Joint Price factory direct, better cost-performance than imported at same spec, low spare purchase and replacement cost. |
| 18 | Single Passage Rotary Joint simple structure, few parts and failure points, easy daily inspection and maintenance. |
| 19 | Dual Passage Rotary Joint two independent channels without cross leakage, can supply water and oil or two fluids together. |
| 20 | Roller Rotary Joint matched rollers and rotating equipment, medium in/out turns with drum, connected reliably without disengagement. |
| 21 | Dryer Rotary Joint adapts hot humid environment, seal and bearing moisture/heat resistant, working continuously with dryer. |
| 22 | Mixer Rotary Joint reliable seal, slurry and fluid in/out stable during rotating mixing, no spillage or leakage. |
| 23 | Rotary Seal Joint sealing face replaceable, worn seal ring changed alone, no whole joint scrap, lowering maintenance cost. |
| 24 | Rotary Oil Union bearings grease lubricated for long operation, small maintenance workload, suited continuous production. |
| 25 | Pipe Rotary Connector flexibly mates equipment interface, compensates alignment error, reducing forced assembly stress on piping. |
| 26 | Wear Resistant Rotary Joint seal and bearing selected for abrasion, handles particle or erosion medium, longer service life. |
| 27 | Industrial Rotary Joint full spec, small bore to high-flow equipment, matched different industry rotating machinery. |
| 28 | Equipment Rotary Union compact size, small axial space, suited limited positions at equipment shaft end and frame. |
| 29 | Custom Rotary Joint matched item by item by medium, temp, pressure, speed and interface, avoiding improper standard selection leakage. |
| 30 | Whole joint supplied with flange, bolts, gaskets and connecting hose, one-time installation on site, simple coordination. |
FAQ

| 1 | What is a rotary joint used for? | Rotary Joint connects fixed pipe and rotating equipment, conveying water, oil, steam into turning drum, roller or shaft while pipe stays still, preventing medium leakage. |
| 2 | Is rotary union the same as rotary joint? | Same product class, Chinese names rotary joint, swivel joint, water joint; English Rotary Joint / Union / Swivel Joint, same principle and structure. |
| 3 | What medium can it handle? | Handles cooling water, hydraulic oil, lube oil, steam, compressed air and some chemical fluids; specify special medium at selection for seal material. |
| 4 | 304 vs 316L stainless? | General water, oil, weak corrosion choose 304; seawater, chloride or weak chemical choose 316L for better pitting and corrosion resistance. |
| 5 | How to determine bore and model? | Calculated by flow, pressure, temp, speed, medium and interface; provide equipment parameters and we recommend model and configuration. |
| 6 | Single vs dual passage? | Single carries one medium; dual two independent channels for two fluids (e.g. water and oil) without cross leakage, choose by equipment. |
| 7 | How often replace seals? | Inspect seal ring periodically under normal service, replace on leakage or wear; life varies by medium, temp and speed; bearing greased by cycle. |
| 8 | Where to install it? | Usually mounted at drum, roller or shaft end; stationary flange connects fixed line, rotating side turns with shaft, mated to equipment interface. |
| 9 | Max speed and pressure? | Standard speed ≤300 r/min, pressure PN6–PN25, determined by seal, bearing and structure; high speed/pressure needs special design. |
| 10 | Lead time? | Standard 15–30 working days; large bore, stainless or special seal 30–45 working days. |
| 11 | CAD drawing available? | After order, 2D outline, installation and seal structure drawing provided; 3D model on request for equipment matching. |
| 12 | How to check seal wear? | Check port and body for leakage, noise or vibration increase; arrange replacement when seal ring cracks or bearing clearance grows. |
| 13 | Will it twist hose? | Internal stationary-rotating separation, rotating side turns with equipment, fixed line does not twist, protecting hose and joint from fatigue. |
| 14 | Suitable for high-temp steam? | Steam service selects heat-resistant seal and grease, heat-resistant body design; temp confirmed by steam pressure and temperature at selection. |
| 15 | Bearing lubrication needed? | Internal bearings greased by cycle or sealed grease bearing, periodic lubrication reduces friction and wear. |
| 16 | ANSI flange available? | GB flange default; ANSI 150# or DIN optional for export with bolts/gaskets; thread or weld interface also customizable. |
| 17 | Will dual passages cross leak? | Dual passages separated independent channels, seals isolate two media, no cross leakage under normal service; confirm media compatibility at selection. |
| 18 | Weight and dimensions? | Outline drawing and weight provided after model confirmation, for installation space and shaft load calculation. |
| 19 | Hose and support bracket available? | Matching hose, adapter and fixing bracket available, reducing additional load on joint, convenient whole-package supply. |
| 20 | Replace whole joint when worn? | No, seal ring and bearing wearing parts replaced individually; body and spindle reused, lowering spare cost. |
| 21 | Export packing? | Ports sealed anti-rust, body protected, large parts wooden case fixed for sea container, preventing impact and moisture. |
| 22 | Connection types? | Flanged, threaded, welded and ferrule types, selected by equipment interface and pipe standard; flange easiest for disassembly. |
| 23 | Food or pharmaceutical service? | Stainless body and hygienic seal optional, polished passivated surface meeting cleanliness; interface configured to hygienic standard. |
| 24 | Prevent misalignment damage? | Align joint with shaft end on install, do not force piping, support bracket bears load properly, avoiding eccentric load damaging bearing seal. |
| 25 | Custom port orientation? | Yes, side/end port and angle designed by equipment layout drawing, channel direction adjusted on demand. |
| 26 | Warranty period? | 12-month warranty whole unit, seal and bearing wearing parts excluded, lifelong spares and technical support. |
| 27 | Is joint noisy? | Bearing support smooth, normal noise low; noise usually bearing wear or dry seal, check lubrication and wear then service. |
| 28 | Particle slurry service? | Particle medium selects wear seal and flush structure, preventing particles entering seal face; provide slurry property for evaluation at selection. |
| 29 | Retrofit old equipment? | Measure existing shaft interface and pipe, select matching joint, retrofit with bracket and hose, solving original joint leakage. |
| 30 | How to quote and order? | Provide medium, flow, pressure, temp, speed and interface for proposal quote; contract confirmed then design, fabricate and ship. |




