Welded Steel Frame Tail Tensioning Mechanism for En Masse Conveyor
Home » Products » Slag Conveyor » Tail Tensioning Sprocket » Welded Steel Frame Tail Tensioning Mechanism for En Masse Conveyor
Welded Steel Frame Tail Tensioning Mechanism for En Masse Conveyor
Welded Steel Frame Tail Tensioning Mechanism for En Masse Conveyor Welded Steel Frame Tail Tensioning Mechanism for En Masse Conveyor
AA AA
AA AA
AA AA
AA AA

loading

Welded Steel Frame Tail Tensioning Mechanism for En Masse Conveyor

5 0 Reviews
Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
Our tail tensioning mechanism is a critical component designed for scraper and en masse chain conveyors used in ash handling systems of thermal power plants. It consists of a welded steel guide frame, cast steel toothed tensioning sprocket, heavy-duty roller chain, sliding block assembly, and horizontal tensioning screw. Available in two configurations: manual screw tensioning for simple applications and hydraulic tensioning with pressure pump and accumulator for automatic constant-tension operation. The standard tensioning stroke is approximately 400mm, compensating for chain elongation under continuous operation. Designed to achieve a service life of no less than 30,000 hours. The toothed sprocket design ensures positive chain engagement even when the chain is loose, making it safer and more efficient than traditional toothless tensioning wheels. Custom dimensions, chain sizes and stroke lengths available upon request.
  • KCY

Availability:
Quantity:


Product Overview

banner_01_product_name


Product Overview
The hydraulic tail tensioning mechanism features two hydraulic cylinders mounted on both sides of the conveyor tail frame, acting synchronously on the sliding blocks that drive the tensioning wheel shaft. A pressure pump continuously pressurizes the system and an accumulator stores energy, releasing it automatically during operation to maintain a specific tension force range. This automatic tensioning system eliminates manual adjustment downtime and protects the chain and sprocket from over-tensioning or slack. The manual version uses a threaded rod and hand wheel for on-site adjustment, ideal for smaller conveyors and low-budget projects. Both versions share the same welded steel frame, toothed sprocket wheel, heavy chain and guide rail construction, with red painted finish standard. We provide complete engineering support, CAD drawings and installation guidance for global customers in power, mining, cement and steel industries.


Technical Specification


banner_02_technical_parameters


Product Name Tail Tensioning Mechanism
Application Scraper conveyor, en masse conveyor, slag/ash handling system
Tensioning Type Manual screw tensioning / Hydraulic automatic tensioning
Tensioning Stroke Approximately 400mm (customizable)
Service Life No less than 30,000 hours under normal operation
Sprocket Type Toothed tensioning sprocket (cast steel, heat-treated)
Chain Type Heavy-duty alloy steel roller chain (pitch per conveyor spec)
Frame Material Welded carbon steel structure (Q235B / Q355B)
Surface Finish Red oxide paint standard; hot-dip galvanizing optional
Guide Rail Precision machined steel guide rails with bronze wear plates
Bearing Double-sealed spherical roller bearing
Screw Rod Trapezoidal threaded rod with lock nut (manual type)
Hydraulic Cylinder Double-acting cylinder with check valves (hydraulic type)
Accumulator Bladder-type hydraulic accumulator (hydraulic type)
Pressure Pump Electric or pneumatic pressure pump unit
Temperature Range -20C to +120C (special high-temp version available)
Sprocket Diameter Custom per chain pitch and conveyor design (typically 200-600mm)
Frame Width Custom per conveyor trough width (typically 300-1200mm)
Safety Feature Chain guard plate, pressure relief valve, limit switch optional
Certification ISO 9001, CE marking available, material mill test reports


Product Dscription


sec_09_three_quarter_graybg The welded steel guide frame provides rigid support for the sliding block and sprocket shaft, with precision-machined guide rails ensuring smooth linear movement during tension adjustment.
sec_06_slide_rail_graybg Cast steel toothed sprocket wheel is heat-treated for wear resistance, with machined tooth profiles that engage chain links positively even under slack conditions.
sec_10_isometric_graybg Heavy-duty alloy steel roller chain is supplied as standard, selected based on conveyor capacity and chain pull requirements for long service life.
sec_01_full_front_graybg The manual tensioning screw uses trapezoidal thread with lock nut, allowing one-person on-site adjustment of chain tension using standard tools.
main_02_sprocket_closeup Hydraulic cylinders with built-in check valves hold tension position even during power loss, preventing chain slack and safety hazards in continuous operation.
main_04_conveyor_install The accumulator stores hydraulic energy and automatically compensates for chain elongation and temperature changes without manual intervention.


Customization


banner_04_customization_accepted


custom_01_photo_cad_split We offer fully custom tail tensioning mechanisms engineered to your conveyor drawings. Frame width, sprocket diameter, chain pitch, tensioning stroke and mounting hole patterns are all tailored to match your existing scraper or en masse conveyor. Material options include carbon steel, stainless steel and wear-resistant linings.
custom_02_dimension_overlay Choose between manual screw tensioning, hydraulic automatic tensioning, or combined manual-hydraulic hybrid design. Hydraulic systems can be equipped with electric or pneumatic pressure pumps, pressure gauges, limit switches and remote monitoring interfaces for smart conveyor control.
custom_03_installation_diagram OEM and ODM services available with your brand name and logo. We produce complete tensioning units as well as replacement components including sprockets, chain, bearing housings, screw rods, guide rails and sliding blocks, shipped worldwide from our factory in China.
custom_04_cross_section Complete turnkey solution includes engineering design, structural FEA verification, manufacturing, factory load testing, documentation (CE, ISO, welding certificates), packing and on-site installation supervision. Our engineering team responds to custom inquiries within 24 hours.


Advantage


banner_03_product_advantages



1 Toothed sprocket design ensures positive chain engagement even when chain is loose, eliminating chain slip common with toothless tensioning wheels.
2 Service life exceeds 30000 hours under normal operating conditions, reducing replacement frequency and maintenance costs for conveyor operators.
3 Two tensioning options cover all applications: manual screw for simple low-duty conveyors and hydraulic automatic for continuous heavy-duty operation.
4 Hydraulic accumulator system maintains constant chain tension automatically, compensating for thermal expansion and chain elongation without downtime.
5 400mm standard tensioning stroke accommodates significant chain wear elongation, extending the interval between chain replacement cycles.
6 Welded steel frame construction is rigid and durable, resisting deformation under heavy chain pull in demanding ash and slag environments.
7 Cast steel toothed sprocket is heat-treated and precision machined, delivering long tooth life and reliable chain engagement year after year.
8 Sliding block guide rails with bronze wear plates ensure smooth tension adjustment and prevent frame scoring in dusty industrial environments.
9 Double-sealed spherical roller bearings tolerate misalignment and contaminated dust, reducing bearing failure and lubrication frequency.
10 Safety guard above chain prevents accidental contact, meeting occupational safety standards and protecting workers during maintenance.
11 Red painted finish provides corrosion resistance and high visibility, allowing quick visual inspection of chain condition during routine checks.
12 Modular design allows individual component replacement, so customers can replace sprocket or screw without replacing the entire frame.
13 Hydraulic version holds tension during power outage via check valves, preventing dangerous chain slack that could cause equipment damage.
14 Compact tail frame footprint minimizes conveyor length, allowing installation where space is limited at boiler house ash outlets.
15 All dimensions custom-engineered to match existing conveyor trough width, chain pitch and shaft height, ensuring drop-in replacement.
16 Manufactured in our ISO 9001 certified facility with full material traceability and welding inspection reports for quality assurance.
17 Suitable for temperatures from -20C to 120C, handling hot ash and slag discharged from thermal power boiler furnaces without issue.
18 Quick-release bearing housing design allows sprocket removal in minutes without dismantling the entire conveyor tail frame.
19 Low operating noise compared to belt tensioners, contributing to a safer and more comfortable plant working environment.
20 We provide complete installation drawings, foundation layout and commissioning support, ensuring correct setup by local installation teams.
21 The toothed wheel design reduces chain wear by distributing load evenly across all engaged teeth, unlike toothless wheels that rub chain side plates.
22 Suitable for horizontal and inclined scraper conveyors up to 15 degrees, adapting to various ash and slag transfer layouts.
23 Manual adjustment requires only a standard wrench, no special tools or power supply needed, ideal for remote and off-grid conveyor sites.
24 Hydraulic pressure can be factory-set to customer-specified tension force, with optional pressure gauge for on-site verification.
25 Hot-dip galvanizing available for outdoor coastal and chemical plant environments, providing 2x longer corrosion protection than paint.
26 We supply replacement sprockets, chains and wear parts for all models, maintaining spare parts availability for at least 10 years after purchase.
27 The tensioning mechanism absorbs startup shock loads from the conveyor, protecting chain and drive sprocket from premature fatigue failure.
28 Both sides synchronously tensioned in hydraulic version, ensuring parallel sprocket alignment and preventing chain derailment from uneven tension.
29 Competitive factory-direct pricing with EXW, FOB, CIF and DDP shipping terms available, supporting international procurement from China.
30 Backed by a 12-month warranty and responsive engineering support, our tail tensioning mechanism is trusted by ash handling plant operators worldwide.


FAQ


banner_05_split_template



1 What is a tail tensioning mechanism? It is a device installed at the tail end of a scraper chain conveyor to maintain proper chain tension, compensate for chain elongation, and ensure positive chain-sprocket engagement.
2 What is the difference between manual and hydraulic tensioning? Manual uses a threaded screw adjusted by hand, simple and low cost. Hydraulic uses cylinders and accumulator for automatic constant tension, better for continuous heavy-duty operation.
3 What is the standard tensioning stroke? Our standard tail tensioning mechanism provides approximately 400mm of tensioning stroke, which compensates for normal chain elongation over the service life.
4 How long is the service life? Under normal operating conditions with proper maintenance, the service life is no less than 30,000 hours.
5 Why use toothed sprocket instead of toothless? Toothed sprockets engage chain links positively, working even when chain is loose. Toothless wheels rely on friction and slip when chain slack occurs, making toothed design safer and more efficient.
6 Can you make custom sizes? Yes, all dimensions including frame width, sprocket diameter, stroke length and mounting holes are custom engineered to your conveyor drawings.
7 What industries use this equipment? Primarily thermal power plants for ash and slag handling, but also mining, cement, steel, chemical and bulk material conveying industries.
8 How does the hydraulic accumulator work? The pressure pump charges the system and stores energy in the accumulator. During operation, if chain elongates, the accumulator releases oil to extend the cylinder automatically, maintaining constant tension.
9 What is the lead time? Standard models ship in 2-3 weeks. Custom engineered units typically take 4-6 weeks depending on complexity and quantity.
10 Do you provide installation support? Yes, we provide CAD installation drawings, foundation layout, and can arrange on-site installation supervision by our engineers.
11 What is the chain pitch range? We can accommodate standard conveyor chain pitches from 100mm to 300mm, including detachable chains and forged chains used in ash conveyors.
12 How do I adjust manual tension? Turn the tensioning nut on the screw rod to move the sliding block forward or backward. Always adjust both sides equally to keep the sprocket parallel. Re-tension after chain break-in period.
13 What paint color is standard? Standard finish is red oxide / red primer as shown in product photos. Custom RAL colors are available at additional cost.
14 Is hot-dip galvanizing available? Yes, for outdoor coastal or chemically aggressive environments, we offer hot-dip galvanizing as an alternative to painted finish.
15 What happens during power outage with hydraulic type? Built-in check valves hold the cylinder position, so chain tension is maintained even during power loss. The accumulator also absorbs any sudden load changes.
16 Can this be used on inclined conveyors? Yes, the tail tensioning mechanism works on horizontal and inclined scraper conveyors up to 15 degrees incline.
17 What is the warranty? We provide a 12-month warranty from date of shipment, covering manufacturing defects. Wear parts like chain and sprockets are covered under normal operating conditions.
18 Do you supply spare parts? Yes, we stock replacement sprockets, chains, bearing housings, screw rods, wear plates and seal kits for all models, available for at least 10 years.
19 What certification do you have? Our factory is ISO 9001 certified. CE marking can be provided for European customers. Material mill test reports and welding certificates are included.
20 How to order? Send us your conveyor model, chain specification, trough width and working conditions. Our engineering team will recommend the right model and provide a quotation within 24 hours.
21 What is the maximum temperature? Standard units handle up to 120C. For hotter ash applications above 120C, we offer high-temperature seals and special lubrication options.
22 Can the sprocket be replaced without removing the frame? Yes, the quick-release bearing housing design allows sprocket removal in minutes by removing the bearing cap bolts, without dismantling the main frame.
23 What is the frame made of? The frame is welded from carbon steel plates (Q235B standard, Q355B for heavy duty), stress-relieved after welding to prevent deformation.
24 How do I know when to re-tension? Monitor chain sag at the return side. When visible slack exceeds 50-100mm, adjust the tensioning screw. Hydraulic type has a pressure gauge showing tension status.
25 Do you export worldwide? Yes, we export to over 30 countries including Southeast Asia, Middle East, Europe, South America and Africa, with EXW, FOB, CIF and DDP terms.
26 What is the minimum order quantity? MOQ is 1 unit for standard models. Custom engineered units also start from 1 set, with sample orders welcome for evaluation.
27 Can you provide CAD drawings before order? Yes, we can provide general arrangement CAD drawings after receiving your basic requirements and a non-disclosure agreement if needed.
28 What lubrication is needed? Guide rails use grease lubrication at specified points. Bearings are pre-lubricated sealed units. Hydraulic system uses anti-wear hydraulic oil (ISO VG46).
29 How does this compare to spring tensioners? Spring tensioners lose force over time and have limited stroke. Our screw and hydraulic designs provide larger stroke (400mm) and maintain consistent force throughout service life.
30 What information do you need for a quote? Please provide: conveyor type, chain pitch and size, trough width, required tensioning stroke, material temperature, and whether manual or hydraulic preferred. We will reply within 24 hours.


4


10


5

6

7

Qingdao Kechengyi Environmental Protection and Electric Power Technologies Co. LTD (KCY) is a comprehensive enterprise focusing on equipment research & development...

Quick Links

Product Category

Contact Us
Tel: +86-15895221943
Add: Sanlihe Industrial Park, Jiaozhou City, Qingdao, Shandong Province
Copyright © 2024 KCY All Rights Reserved. | Sitemap | Privacy Policy