KCY
| Availability: | |
|---|---|
| Quantity: | |

| Product Overview |
Our KCY Tank Pump as Pneumatic Conveying Tank is widely used in power plant Positive Pressure Pneumatic Conveying systems, achieving long-distance enclosed transport of dry ash and fly ash. This Ash Sending Pot features dual-vessel alternating design for continuous uninterrupted conveying. The Pneumatic Ash Conveying System comes with PLC control cabinet for fully automatic feeding, pressurizing, conveying and discharging cycles. As Pressure Vessel Pump, it is wear and pressure resistant, adapting to all power plant pneumatic conveying conditions. Ash Sending Vessel can be customized based on customer capacity, distance and pipe diameter, preferred brand for Fly Ash Sending Vessel and Dry Ash Conveying Pump. KCY also supplies Dust Conveying Pump, Fly Ash Sending Pump and full series, trusted Pneumatic Sending Tank supplier for power plant conveying equipment. |

| Product Name | KCY Pneumatic Conveying Pressure Vessel |
| Vessel Volume | 0.5 – 10 m³(customizable) |
| Conveying Pressure | 0.2 – 0.6 MPa |
| Capacity | 5 – 100 t/h( ash) |
| Conveying Distance | 50 – 1000 m(designable) |
| Inlet Diameter | DN100 – DN300 flange |
| Outlet Diameter | DN80 – DN200 flange |
| Main Material | Q235B CS / 304 SS |
| Design Pressure | 0.7 MPa(design margin) |
| Working Temp | ≤200°C(high-temp type) |
| Valve Type | disc / dome / gate valve |
| Control | local / PLC auto / DCS remote |
| Air Supply | 0.4 – 0.7 MPa |
| Air Consumption | 15 – 40 m³/min( varies) |
| Wall Thickness | 8 – 16 mm(per pressure) |
| Coating | epoxy zinc-rich primer + finish |
| Installation | silo bottom stationary |
| Protection | IP55(control cabinet) |
| Weight | 800 – 6000 kg(depends on size) |
| Brand | KCY |



| 1 | Pneumatic Conveying Pressure Vessel delivers enclosed conveying with zero dust leakage, meeting power plant emission standards and improving site environment, truly eco-friendly Fly Ash Conveying Equipment. |
| 2 | Ash Sending Tank uses positive pressure conveying principle, long distance from tens to over 1000 meters, no layout restrictions, flexible installation. |
| 3 | Pressure Conveying Vessel uses dense phase technology with high solid-air ratio, high concentration, saving compressed air and energy, low long-term operating cost. |
| 4 | Pneumatic Ash Conveying System uses fully enclosed pipeline with no dust escape, reducing material waste and protecting worker health, complying with occupational safety standards. |
| 5 | Pneumatic Conveying Pot has simple structure with few moving parts. Main valves are wear-resistant, low failure rate, minimal maintenance, suitable for 24/7 power plant operation. |
| 6 | Dry Ash Conveying Equipment is corrosion resistant. Vessel can have anti-corrosion coating or stainless steel material, adapting to humid and corrosive ash conditions, long service life. |
| 7 | Power Plant Ash Handling System comes with automatic control system, PLC fully automatic operation, self-diagnosis, real-time parameters display, easy to operate. |
| 8 | Dense Phase Conveying Pump has high solid-air ratio with low pipe wear, material moves as slow piston plug rather than high-velocity dilute phase scouring the pipe wall. |
| 9 | Ash Sending Pot is compact with small footprint, ideal for limited space under ash silo, vertical layout saves floor area. |
| 10 | Pneumatic Ash Conveying Pump can deliver to multiple silos simultaneously through switching valves, one system serves multiple discharge points. |
| 11 | Pressure Vessel Pump is rated up to 0.6MPa, suitable for long-distance high-head conveying, overcoming high pipe resistance. |
| 12 | Fly Ash Sending Vessel bottom fluidization device turns ash into fluid state, no bridging or pipe blockage, stable conveying even with slightly moist ash. |
| 13 | Tank Pump has low installation height, directly connects ash silo outlet, no complex transfer equipment needed, simple reliable system, low investment. |
| 14 | Pneumatic Conveying Tank can add weighing module for real-time batch measurement, convenient for fly ash outbound statistics and cost accounting. |
| 15 | Power Plant Ash Conveying system operates quietly in enclosed mode, much lower noise than mechanical conveyors (bucket elevator, screw conveyor). |
| 16 | Sending Vessel adopts modular design, valves and instruments can be replaced individually without full disassembly, quick maintenance. |
| 17 | Enclosed Conveying Pump has no dust spillage, improves site environment, reduces cleaning work and maintenance cost. |
| 18 | Dust Conveying Pump pipe diameter DN80-DN200 per capacity, small pipe saves space, ideal for retrofit projects with limited space. |
| 19 | Ash Sending Vessel undergoes strict hydraulic and air tightness tests before delivery, ensuring zero leakage and safe reliable operation. |
| 20 | Pneumatic Sending Tank supports DCS remote control, power plant central control room can start/stop and monitor remotely, unattended operation. |
| 21 | Positive Pressure Pneumatic Conveying pipeline is flexible, can be horizontal, inclined or vertical, routing around equipment and buildings. |
| 22 | Dry Ash Conveying Pump has low material degradation, slow dense phase conveying preserves fly ash particle shape, maintaining material quality. |
| 23 | Fly Ash Sending Pump stainless steel option available for food, chemical and other industries with hygiene or corrosion requirements. |
| 24 | Power Plant Conveying Equipment complete package from vessel, valves, pipes to control system, one-stop purchase reducing multi-party coordination cost. |
| 25 | Low Pressure Pneumatic Conveying system for medium-short distance and medium capacity, moderate energy cost, cost-effective, common solution for small-mid power plants. |
| 26 | KCY Ash Sending Tank manufacturer has years of power plant ash equipment experience, familiar with international standards, providing complete service from design to commissioning. |
| 27 | Pneumatic Conveying Pressure Vessel handles various dry powders, besides fly ash it also conveys cement, mineral powder, lime powder and grain. |
| 28 | Automatic Ash Sending Tank controls full cycle automatically: feeding, pressurizing, conveying, discharging. Operators only monitor, low labor intensity. |
| 29 | Wear Resistant Pneumatic Conveying Vessel liner is replaceable, when worn only replace liner plate not whole vessel, greatly extending equipment life. |
| 30 | Pneumatic Conveying System has excellent sealing, no secondary pollution from dusty air, eco-friendly preferred ash conveying solution for power plants. |





FAQ
| 1 | How does a pneumatic conveying pressure vessel work? | The vessel uses compressed air to pressurize dry ash inside and push it through pipeline to destination silo. One cycle includes feeding, pressurizing, conveying and exhausting, automatically controlled by PLC. |
| 2 | What is the maximum conveying distance? | Depending on capacity and pipe diameter, our vessel can convey over 1000 meters. Exact distance calculated based on project pipeline layout. |
| 3 | What is the capacity per hour? | Single vessel capacity ranges 5 to 100 t/h. Large capacity uses dual vessels in parallel for continuous conveying. |
| 4 | Advantage over screw conveyor? | Vessel is fully enclosed with no dust leak, long distance, flexible pipeline, few moving parts, low wear and maintenance cost. |
| 5 | What materials can it convey? | Mainly fly ash and boiler dry ash, also cement, mineral powder, lime powder and other dry powders. High moisture materials are not suitable. |
| 6 | How much compressed air is needed? | Air supply pressure 0.4-0.7MPa, consumption 15-40 m³/min depending on capacity and distance. We provide exact calculation. |
| 7 | Single vs dual vessel system? | Single vessel is batch type with lower cost. Dual vessels alternate for continuous conveying, ideal for high capacity uninterrupted operation. |
| 8 | Where is the vessel installed? | Usually installed under ash silo outlet, flanged to silo, outlet connects conveying pipeline to destination silo. |
| 9 | Is pipe blockage common? | Well-designed system does not block. Bottom fluidization and proper solid-air ratio prevent bridging. We have proven anti-blockage design and purge program. |
| 10 | How often to replace valves? | Disc or dome valve seals inspected and replaced every 6-12 months under normal conditions. Valve body lasts 3-5 years. |
| 11 | Can it connect to plant DCS? | Yes, control cabinet has standard remote signal interface, supporting DCS remote start-stop, status feedback and alarm. |
| 12 | Stainless steel available? | Yes, 304 or 316L stainless steel vessel for corrosive materials or food-grade requirements, higher price than carbon steel. |
| 13 | Max temperature resistance? | Standard type 80°C. High-temp type with heat-resistant steel and seals handles hot ash up to 200°C. |
| 14 | GB or ANSI flange? | GB flange as standard. ANSI 150# or DIN flange available for export, with matched bolts and gaskets. |
| 15 | Can one vessel feed multiple silos? | Yes, pipe switching valves can select different destination silos, one system serves multiple discharge points. |
| 16 | Is the vessel noisy? | Normal operation below 75dB, mainly intake and exhaust sound. Muffler can be added for further reduction. |
| 17 | What is the lead time? | Standard models 15-30 working days. Large size, stainless or high-temp type 30-50 working days. |
| 18 | Can you provide foundation drawing? | Yes, after order confirmation we provide foundation load drawing, dimensional drawing and P&ID for design institute and construction team. |
| 19 | Routine maintenance needed? | Regularly check seal wear, valve operation, pressure gauge accuracy, lubricate air cylinders. Maintenance is minimal. |
| 20 | Suitable for old plant retrofit? | Very suitable. Vessel vertical layout saves space, can replace existing screw or pressure conveying system with small retrofit scope. |
| 21 | What is the working pressure? | Conveying pressure 0.2-0.6MPa per distance and capacity, design pressure 0.7MPa with margin. |
| 22 | Explosion-proof version available? | Yes, electrical components can be explosion-proof for dust hazardous areas, with explosion-proof certificate. |
| 23 | Will ash leak during conveying? | No, the whole system operates enclosed, flanges and valves have reliable sealing, zero leakage during normal operation. |
| 24 | Vessel vs air lift pump? | Vessel is positive pressure pushing for long distance high capacity. Air lift pump is low pressure fluidized lifting for short distance low capacity. |
| 25 | Can it be shipped by container? | Yes, vessel body and frame can be disassembled for container loading. Export packing prevents sea freight damage. |
| 26 | Warranty period? | 12-month warranty on whole unit. Wear parts (seals) excluded. Lifelong spare parts and technical support. |
| 27 | What is included in control cabinet? | Control cabinet includes PLC, HMI touchscreen, breakers, solenoid valve bank, manual/auto switch, standard remote interface. |
| 28 | Do we supply conveying pipes? | We can supply complete pipes, bends, expansion joints. Or vessel only if customer provides own pipes. |
| 29 | What industries use it? | Thermal power plants, CHP plants, cement plants, chemical plants, steel mills, waste incineration plants and other dry powder enclosed conveying industries. |
| 30 | How to select the right model? | Please provide material type, capacity, conveying distance, pipe diameter and layout. Our engineers calculate and recommend optimal model and configuration. |